FBD (Fluid Bed Dryer)
 
The use of ‘Fluid-Bed’ technique on industrial scale, has been considerably on the increase, specially for drying, cooling, calcination, agglomeration, combustion and in many other unit operations, due to its manifold advantages.

Compared to conventional batch and other continuous drying method, Fluid-Bed technology offers several advantages such as, no product lump formation / caking, no particle overheating/ cooling, a well defined product residence time, uniform product quality, better energy economy due to lower specific heat requirements etc.,

In ‘Fluid-Bed" the material is uspended in an upward moving hot-air and the mass behaves like a boiling fluid after "Fluidization".

Thus Fluidization is basically a state of dynamic balance of solids in fluid. Quantity of fine solids in a form of bed are placed on a distributor plate and hot air is passed slowly.

Special Features :
  • Rapid exchange of granules
  • Low drying temperature
  • Electric or steam heated
  • Little space required
  • 15 kg. to 250kg batch capacities

In compliance with cGMP guidelines
Modular Design
Uniform Drying with reducing Drying time
Quick Dismantling of Dutch Sieve & Perforated Sheet at the Product container
Online Sampling Device
Fully Automatic Operation through Programmable Logic Controller (Optional)
Product Container with Stirrer (Optional)
Flameproof Construction (Optional)


Model TMFBD 15 TMFBD 30 TMFBD 60 TMFBD 120 TMFBD 200 TMFBD 300 TMFBD 400 TMFBD 500 TMFBD 600
Container Gross Volume Ltr. 46 71 142 280 475 650 870 1055 1350
Max. Batch Capacity (0.5 bd) Kg 10 to 15 20 to 30 40 to 60 80 to 120 160 to 200 200 to 300 300 to 400 400 to 500 500 to 600

Blower Motor HP**

5 7.5 10 20 25 30 40 50 50
Air Flow(CFM) ± 10 % 430 706 1060 1880 2590 3235 3825 4000 4705
Steam Pressure (Kg/cm2) 3.5
Steam Consumption (Kg/Hr) 30 50 80 140 216 250 288 344 384
Electric Heater (KW) 20 20 36 60 N.A. N.A. N.A. N.A. N.A.
Compressed Air Pressure (bar)         6        
Drying Temp (°C) 35-80
Power Supply 415 V ± 10 %, 3 Phase, AC
** The blower motor of higher capacity will be required in machine if supplied with HEPA, Scrubber & ducting length above 5 meters.
 
 
« Back to Products
     
back to top
  Copyright @ 2013 Trade Mark Engineers
Home Profile Product Range Product Gallery Contact Us